600W DC-DC Boost module Step-up Power Supply 10-60V to 12-80V high power

600W DC-DC Boost module Step-up Power Supply 10-60V to 12-80V high power

Description:

600W high power boost module, wide voltage input: 12V ~ 60V, 12V ~ 80V adjustable wide voltage output; output current can be adjusted; ultra low input and output voltage difference.

Specification:

Input voltage: 12V-60V

Input current: maximum input current 15A

Output voltage: 12V-80V continuously adjustable

Output current: Maximum output current 10A (adjustable)

Output power: effective power P = input voltage V * 10A

Conversion efficiency: up to 95% (input voltage, current; output voltage, current affects conversion efficiency)

Short circuit protection: fuse

Module size: 80*62*60mm

Weight: about 275g

Detailed description:

1. The product is solid and uses a custom radiator. Specifications: Radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed radiator above, rational design, integrated design of radiator and booster plate It is convenient for users to use directly, and can be directly fixed by using long screws when using.

2. Inductor magnetic ring adopts 27mm iron silicon aluminum magnetic ring, 1mm double wire-wound inductor, high-quality filter capacitor, input 1 1000uF63V electrolytic capacitor, output two 470uF100V electrolytic capacitor, boost output power quality is better, onboard power supply Switch, power supply working indicator, with voltage regulation, current adjustment potentiometer, make the output more convenient, can adjust the output voltage and current at any time. The input and output adopt 8500 terminal block, which has a strong current capability and ensures long-term reliable operation.

Application range:

1. DIY is an output-adjustable vehicle power supply. It only needs to be connected to the 12V power supply at the input. The output voltage can be adjusted continuously (14V-80V), but the output voltage cannot be lower than the input voltage.

2. Universal car notebook power supply. Input 12V power supply, the output can be adjusted to the voltage required by the notebook to work.

3. Boost charger, can charge 12V battery with 12V power supply, such as 24V battery, and the charging current can be adjusted.

4. Powering the electronic equipment, as long as the voltage is adjusted to the required voltage and the current does not exceed the rated current, it can work normally.

5. The system front-level power supply, when doing a project, the input is 12V-18V, the system board needs about 24V power supply and the power is very large, the ordinary DC-DC module power is too small, then this module will be your best The choice can be done without commissioning directly on the machine, easily achieving high efficiency and high power boost.

Module application example:

1. Input voltage 12V current 8.73A, boost output voltage 20V current 5.0A, module efficiency is about to 86%, output voltage, current stability

2. Input voltage 54V current 13.5A, output 58V current 12A, use 5Ω1Kw resistor as a load test, the efficiency is 95%

3. Module output 965W test chart, using 5Ω1Kw resistor as load test

1 x 600W DC-DC Boost module Step-up Power Supply 10-60V to 12-80V high power