A10S Digital Display Intelligent Thermostat DC 12V Temperature Controller NTC Sensor Physical/Touch Button with Infrared Remote

Price range: 540.00৳  through 600.00৳ 

šŸŒ”ļø Temperature control range: āˆ’50°C to +110°C with ±1°C precision
šŸ”‹ Powered by DC 12V, supports heating and cooling modes
šŸ“Ÿ LED display shows real-time temperature clearly day or night
🧠 Supports physical/touch buttons and infrared remote control
šŸ“ Size: 75Ɨ60Ɨ37mm, compact ABS shell for easy installation
šŸ”§ Direct output type, load capacity up to AC250V/5A
🌊 Waterproof NTC sensor (10K 0.5%) with 0.5m cable included
āš™ļø Adjustable hysteresis, stop temp, and high-temp alarm settings
šŸ”„ Factory reset via P7 menu, easy setup and calibration
šŸ“¦ Package includes thermostat, ready for panel or enclosure use
šŸ› ļø Ideal for incubators, aquariums, HVAC, and DIY automation

Add 2,340.00৳  to cart and get free shipping!
Description

A10S Digital Display Intelligent Thermostat DC 12V Temperature Controller NTC Sensor Physical/Touch Button with Infrared Remote Control

Description:
This product is a high-precision temperature controller with an accurate temperature control of 0.1°C and an ultra-wide temperature control range of -50°C-110°C. It uses a high-brightness LED display, which can clearly display the readings during the day or night. It can be used normally in various temperature control fields.
Parameter:
Product Name: Digital Display Smart Thermostat A10S
Power supply voltage: DC12V
Control mode: heating/cooling
Temperature measurement range: -50ā„ƒ-110ā„ƒ
Temperature control accuracy: ±1ā„ƒ
Temperature control range: -50ā„ƒ-110ā„ƒ
Load power: AC250V/5A
Output type: direct output
Shell material: ABS material
Appearance size: 75mm*60mm*37mm (length * width * height)
Temperature measuring probe: NTC (10K 0.5%) waterproof sensor, about 0.5 meters
Instructions for use:
1. Confirm working mode
Hold down the set key for about 5 seconds to display P0, press set again to modify the value of P0, H is heating mode, C is cooling mode, and the default is cooling
2. Set the return difference
The hysteresis is how much to fall back to the set temperature and start again, the default is 2°. If you need to modify, please press and hold set to enter P1 to modify
3. Set stop temperature
After setting the mode and hysteresis, long press the set button or return without any action for 10 seconds. At this time, the screen displays the real-time temperature. Press the set button once and the screen flashes directly to set the stop temperature.
4. The function of the infrared remote control button is the same as that of the temperature control panel button
5. If you need to restore the factory settings, set P7 to “ON”, then long press SET to confirm the return or wait for the temperature control to return automatically
6. high temperature alarm P6
Under this menu, the high temperature alarm value can be set. The default is OFF, that is, when the detected temperature is higher than 110, the buzzer will alarm; in addition, by pressing the “+” or “-” key, after selecting ON, press the “SET” key again to set the high temperature alarm value
Before setting the temperature control of the touch button version, you need to press the “SET” button twice to unlock; then, the method of setting parameters is the same as that of the physical button version.
Package included:
1 Ɨ A10S Digital Display Intelligent Thermostat Physical/Touch Button

 

Additional information
Variant

Touch Button

,

Physical Button

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “A10S Digital Display Intelligent Thermostat DC 12V Temperature Controller NTC Sensor Physical/Touch Button with Infrared Remote”

Your email address will not be published. Required fields are marked *

Shipping & Delivery