AC Pump
Air Pump
DC Solar Pump
Brushless Motor
Stepper Motor
Servo Motors
AC Synchronous Motor
Linear Actuator Motor
Audio Amplifier
Convertor Boards
Microcontroller
Motor Driver
Relay
Voltage Regulator
Charger & Power Supply
Battery Holder Case
Li-Po Battery
Lithium iron phosphate battery
Lithium-ion Battery
Solar Panel & Inverter
3D Printer Parts
Body Chassis
CNC Parts
Gears – Gearboxes
Hub – Motor – Wheel Coupler
Motor Holders
Plastic Box
Wheels – Shafts
Sensor & Wireless Module
D
FNIRSI DMC-100 is a 10,000-count high-precision intelligent clamp meter, covering 750V voltage and 600A current ultra-wide range, whether it is engineering maintenance, laboratory research, or vehicle overhaul, home electrical diagnostics, can be easy to handle.
Features
- High-Precision Measurement: 10,000-count True RMS intelligent clamp meter for accurate readings.
- Wide Measurement Range: Supports up to 750V voltage and 600A current.
- High-Quality Display: 2.0-inch 240 × 320 full-color TFT screen for clear visuals.
- Intuitive Interface: New UI with data curve display for easy reading at a glance.
- Three Measurement Modes: Switch freely between general measurement, waveform display, and power measurement modes.
- NCV Function: Non-contact voltage measurement and zero/fire line identification.
- Wide Temperature Range: Measures temperatures from -55°C to 1300°C.
- Long-Lasting Battery: Built-in 3.7V 1500mAh battery for extended usage.
- Type-C Interface: Convenient charging and data transmission via Type-C port.
- Additional Functions: Includes a flashlight, screen backlight, and data-saving capabilities.
- Auto Power-Off: Intelligent automatic shutdown to conserve battery life.
- Temperature Unit Switching: Easily switch between temperature units (℃/℉).
- Adjustable Brightness: Screen brightness is adjustable for various environments.
- Firmware Upgradeable: Supports firmware updates to enhance functionality.
Specifications
Brand FNIRSI
Model
DMC-100 Screen 2.0” TFT color screen
Screen Resolution 240*320 pixels
Battery 3.7V, 1500mAh Lithium Battery
Charging Specification USB Type-C, 5V/1A
Maximum Jaws Size 25mm
Temperature Unit ℃/℉
Product Size 193x74x32mm
Product Weight 194g
DC Voltage 9.999V / 99.99V / 999.9V
AC Voltage 9.999V / 99.99V / 750.0V
DC & AC Current 99.99A / 600.0A
Resistance 99.99MΩ / 9.999MΩ / 999.9KΩ / 99.99KΩ / 9.999KΩ / 999.9Ω
Capacitance 9.999mF / 99.99mF / 999.9μF / 99.99μF / 9.999μF / 999.9nF / 99.99nF / 9.999nF
Frequency 9.999MHz / 999.9KHz / 99.99KHz / 9.999KHz / 999.99Hz / 99.99Hz / 9.999Hz
Temperature -55~1300℃ / -67~2372℉
Diode Measurement Support
On-off Test Support
Non-Contact Voltage Check (NCV) Support
Zero Fire Wire Check Support
Measuring Mode –
1. General Measurement
2. Waveform Display
3. Power Measurement
2. Waveform Display
3. Power Measurement
Measurement Gear
Manual Adjustment
Torch Support
Data Zeroing Support
Maximum/Minimum Value Support
Waveform Display Support
Power Calculation Support
Data Hold Support
Data Storage and Viewing Up to 30 groups of data
Language Chinese / English
Brightness Adjustment 10-speed adjustment
Auto Power Off OFF / 5min / 15min / 30min
Firmware Upgrade Support
AC Current 4A / 40A / 600A
Resistance 400Ω / 4KΩ / 40KΩ / 400KΩ / 4MΩ / 40MΩ
⚠ Precautions
- Before using the product, check if the insulation near the casing and interfaces is damaged.
- Hold the probes by the protective grips.
- Do not touch any of the input ports when measuring a circuit.
- Disconnect the test probes from the circuit before changing the measurement range.
- When measuring DC voltages above 36V or AC voltages above 25V, exercise caution to avoid electric shock.
- Select the correct range for measurement to avoid damaging the instrument. The screen will display “OL” when the measurement exceeds the range.
- When the battery level is critically low, a popup will alert you. Charge the battery promptly to avoid affecting measurement performance. Do not use the device while it is charging.
Reviews
There are no reviews yet.